ALBUQUERQUE SERPENTINM BELT REPLACEMENT

Serpentine Belt Replacement In Lincoln NM

Serpentine Belt Replacement service near Lincoln NM: The engine of a car produces an incredible amount of power that is needed by many different parts of your vehicle to operate. While there is a lot of power produced by your engine, it does rely on other parts of the car to transport this power. One important part of this process is the serpentine belt, which is used to connect the alternator, air conditioner, power steering system, and a variety of other parts to the engine. Without it, these parts will not work. In some cases, you may need to schedule a serpentine belt replacement service.

You May Need A Serpentine Belt Replacement

If your vehicle seems to be struggling, the engine is not starting, or you are having a variety of other mechanical challenges, it could be due to a faulty serpentine belt. Since these issues could be related to a variety of other issues that you are having with your car, it is important that you have your vehicle inspected by a certified technician. Based on this inspection, it could be concluded that you will need a new serpentine belt. If this is the case, the technician will easily remove the existing belt and then install a new one.

The Dangers Of Delaying Service

When you are having any issues that you think could be related to your serpentine belt, it is important that you schedule service to have it fixed as soon as possible. The serpentine belt is needed to connect many different important parts to your car. When you have this inspected and replaced, it will help to ensure that this part is able to work appropriately. This could then allow you to drive your car without concern that your alternator, air conditioning, or power steering is failing.

One mistake that some car owners make is delaying a service as important as a serpentine belt replacement service. If you do delay this service for too long, it will ultimately have some very negative effects on your car. All of the connected parts could eventually fail and struggle to work. This could then require far more serious repairs in the future.

Choose Mobile Auto Truck Repair Lincoln Of Highland Park

When you need to replace your serpentine belt, you should come to Mobile Auto Truck Repair Lincoln, which is a popular service center option for those in and around the Lincoln NM area

When to consider replacing the serpentine belt:

• Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
• Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
• Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
• Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

5 Symptoms of a Bad Serpentine Belt

Serpentine Belt Replacement service near Lincoln NM:A serpentine belt is designed to last a long time. But eventually, the heat and friction will wear it down and it will need to be replaced. Here are some signs of a failing serpentine belt:

• Signs of wear (cracking, glazing, fraying, etc.)
• Squealing or chirping sound (indicates a slipping belt)
• Performance loss (power steering failure, sudden car battery drain or stalled engine)
• Check Engine Light
• Unusual noises

When replacing the serpentine belt keep in mind:

On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.

Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.

Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.