ALBUQUERQUE AUTOMOTIVE SIDE WINDOW WIND DEFLECTOR INSTALLATION

Automotive Side Window Wind Deflector Installation

Automotive Side Window Wind Deflector Installation Service near Lincoln NM: Side Window Deflectors from Mobile Auto Truck Repair Lincoln are custom fit for your vehicle’s specific make and model, conveniently and easily installing right into the window channel. This ensures that there is no exterior tape needed to successfully install these products, and it gives them a true factory installed OEM appearance. Optically transparent, Mobile Auto Truck Repair Lincoln’s Side Window Deflectors will not negatively impact your field of vision.

Handcrafted from the finest 3mm acrylic material available, these low profile wind deflectors reduce wind noise while driving. In addition, you’ll be able to enjoy air to circulate through your vehicle while your windows are open slightly during inclement weather. They also work wonders to help keep your vehicle cool during hot summer days, having your windows open will help keep cooler air circulating through your vehicle without having to worry about surprise weather changes.

1. Thoroughly Clean Your Windows Prior to Installing Window Deflectors:

Thoroughly clean your windows and the window channel itself, giving both time to dry. Washing away all the dirt, dust and road grit will help the installation process go smoothly and ensure a fantastic fit.

2. Identify and Test Fit the Window Deflector Pieces:

While your windows and window channels are drying, now is a good time to clearly identify which sides of the vehicle your window deflectors are for. Depending on the set you purchased, there will be either 2 or 4 deflectors in the box. Lay out each deflector with the Mobile Auto Truck Repair Lincoln logo positioned towards the rear of the vehicle.

3. Insert Window Deflector into the Channel:

Once the windows and channels are dry, it’s time to begin the window deflector installation in earnest. Start on the driver’s side by lowering the window about halfway. Take the front of the deflector and slide it into the window channel. Make sure that the front edge of the wind deflector is resting on top of the outer window sill. It is important that the front edge is on the outer sill, and not within your vehicle’s window well. If the front edge is not properly placed, raising your window may cause damage to either the window deflector or your vehicle’s window.

4. Insert Rear Edge:

After the front edge is secure, you’ll need to secure the opposite edge. Start by bowing the deflector slightly outward until you’re able to fit the rear edge into the window channel. Make sure to leave a small amount of space at the top of the deflector (anywhere from ¼” to ½” gap).

5. Tuck in the Deflector:

Now that the back of the window deflector has been placed into the window channel, it’s time to fit the rest of the window deflector into place. Starting at the front of the window, gently pull down the deflector until it has cleared the outside of your window and tuck the edge of the window deflector into the window channel. Work your way from front to back until the entirety of the deflector has been tucked into the window channel.

Once you’ve completed that process, carefully pull the deflector outward to secure it within the window channel.

6. Installing the Rear Window Deflector:

Start by identifying the driver’s side rear window deflector by matching up its shape and size with the corresponding window on your vehicle. Be sure to remove the adhesive backing (if supplied) and slide the deflector upward into place. Gently pull the deflector outward to properly set it within the window channel.

7. Roll up the Windows:

Slowly and carefully roll up your front and rear driver’s side windows five times. Do not activate the auto-up function on your vehicle (if applicable).

8. Repeat for Passenger Side:

Repeat Steps 3 through 7 for the passenger side of the vehicle. Once you’ve installed both sides of Side Window Deflectors, leave your windows fully closed for at least 12 hours. This will allow the deflectors to properly set within the channels.

Benefits of Side Window Deflectors

Automotive Side Window Wind Deflector Installation Service near Lincoln NM: Reduce wind noise. Opening your windows as you drive can let in a lot of noise and wind, depending on where you’re driving. The best side window deflectors reduce wind noise. They redirect wind up and over the vehicle, so it doesn’t go inside.

• De-mist windows. Window deflectors can enhance your driving experience. In chilly weather, condensation can cause your windows to fog up, making it hard for you to see. Window deflectors prevent this from happening by demisting the windows. They also help minimize condensation in winter.
• Make your car more comfortable. Window visors deflect wind and rain away from your car’s windows. The interior becomes a more comfortable environment because outdoor elements don’t make their way in.

Types of Side Window Deflectors

• TAPE-ON

These can be installed easily because they feature adhesive tape. The tape is fixed at the bottom, where the deflectors connect to the car’s windows. These visors divert rain better because they go outside the window channel. They push rain further away from your car’s windows. Their major upside is they don’t meet the windows at any point. But it can be challenging to remove them because they can damage the vehicle’s paint. When removing them, do it slowly and use a mild citrus-based cleaner to clean the residue.

• IN-CHANNML

These deflectors are a better option for car owners worried about their cars’ paint finish. They are secured by the window channels, so there is no adhesive to fret over. They look better and are less prone to damage compared to tape-on deflectors. They are also easier to remove, you only need to apply some force. However, it’s important that these deflectors fit your car perfectly, or they may rattle, loosen, and fall out. And since they are right next to the windows, they may scratch the glass if loose.

Key Features

Automotive Side Window Wind Deflector Installation Service near Lincoln NM:

• Deflector Type

Window deflectors can either be universal or custom-made. Universal rain guards are much more popular and are also affordable. However, they only last for a short period. Custom-made deflectors last longer, but they tend to be more expensive. Whether you decide to get universal or custom-made deflectors, confirm if they match your car windows’ curvature. If you get the wrong deflectors, you may have to keep adjusting them manually, increasing the tension in the plastic. At the slightest impact, they may get damaged.

• Vehicle Fit

It can be very frustrating to buy window visors only to find out they don’t fit your windows as they should. Some window deflectors are only designed for specific cars, so it’s up to you to do some due diligence before buying. Most manufacturers provide this information and you can reach out to those who don’t. How the rain guards will be installed further determines how well they will fit your car.

• Toughness

Since side window deflectors are installed on the outer part of a car, they should be tough and durable. They will be rained on, snowed on, baked by the sun, and hit by road debris as the vehicle moves. Choose window deflectors that are tough enough to withstand the elements and can ward off damage caused by UV rays. They should remain in place even after multiple car washes.

Other Considerations

Automotive Side Window Wind Deflector Installation Service near Lincoln NM:

• Ease of Installation. Look for window visors that can be installed easily and quickly. They should also be long-lasting. Before installation, clean the deflectors and your car’s windows and leave them to dry. Then test-fit each of the pieces to find out which one goes where. Finally, install the deflectors.
• Deflector Shape. The shape of the rain guard determines which car it fits and the exact window it fits. The best side window deflectors have mounting seats that repeat the car windows’ curvature. Also check the deflector’s plane deviation angle because it can cause extra resistance as you drive, especially at high speeds. This may loosen the seal, and the deflector may get detached.

Window Deflectors provide drivers with the opportunity to breathe some fresh air even on the worst days without letting in a howling breeze or rain and snow. Installing these accessories is relatively simple, but don’t take the process for granted. If you have any process regarding Window Deflector installation, please feel free to contact our dedicated and helpful Customer Service staff.